Buy A Spray
The electrical Bort BFP-110N is designed to produce painted paint material for painted surfaces. The model of relatively small capacity effectively replaces conventional " tools " , the brush and the valleys. Work Bort BFP-110N is much more comfortable and faster. The light Bort BFP-110N with the portable paint container can be painted in a short time by a sufficiently large area. In order to regulate the quantity of LCM a rifle is provided in the rear of the hull. His turns change the intensity of paint in the work area.
The principle of action is not. During the operation, the pressure melter " removes " from the surface of the cloud of paint that falls on the painted surface. The maximum efficiency of the colouring and flow of LCM is achieved by using the instrument at a distance of 25 to 30 cm.
Different types of paint are used with the dispenser. The basic requirement is to be a certain viscosity: the use of a dense, tractoral fluid will not be possible. Determine the viscosity of the paint with a bow-wiscosimeter in the kit. If the paint has a viscosity greater than recommended by the operational instructions, it should be diluted to the appropriate solvent level.
Before refilling the container, the selected paint should be heated in case it meets the comas that can stain the openings of the alloy.